Third Party Test Results

Test Method Third party report
ASTM C177, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
• Measurements at 0, 100, 200, 300, and 600C

Download
ASTM C177, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
• Measurements at 400 and 500C

Download
ASTM C1511, Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
Download
ASTM C1104, Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials
Download
ASTM C795, Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
Download
ASTM C871, Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
Download
ASTM C1338, Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
Download
ASTM 356, Standard Method of Linear Shrinkage of Preformed High-Temperature Thermal Insulaiton Subjected to Soaking Heat
Download
ASTM C411, The subject of this report is the Hot Surface Performance of Lewco Super Mat blanket insulation.
Download

Lewco Super Mat © 2020
All rights reserved
back to top